Site Search:

0-1600 PSI High Accuracy Nitrous Bottle Pressure Transducers

Nitrous Pressure Transducer Measures 0-1600 PSI

$68

In
Stock
  • Measure pressure from 0-1600 PSI
  • Made with 316 stainless steel and high temperature auto-graded plastic
  • 0.5V – 4.5V linear voltage output, for 4-20mA output version, please check this out
  • Accuracy ±0.5%FS.
  • Works for oil, fuel, brake fluid, water or air pressure
  • Mating connector and wire harness (3 ft pigtail) included
  • IP65-66 Rated
  • Compatible with many Dataq Instruments hardware products including DI-2108, DI-2108-P, DI-4108, DI-4208, DI-4718B (with appropriate 8B module), and DI-2008/808 (with 15V to 5V DC2DC)
  • Customization available on ranges and sealing material
  • Learn how to connect and measure PSI with this pressure sensor
Tweet this page Like this product on Facebook Share this page on LinkedIn Email this page
0-100 PSI, ±0.5% Accuracy  Pressure Sensor
 

Description

The Pressure sensor measures from pressure 0-1600 PSI when connected to a Dataq Instruments Data Acquisition product or Data Logger.

The pressure sensor allows Dataq Instruments data acquisition and data logger units to acquire oil, fuel, air, brake fluid (DOT3/DOT4) or water pressure (PSI) information. The combination of these two products provides a compact solution, with transducer excitation provided by the data logger. The logger itself allows data to be communicated to a connected PC over either a USB or Ethernet interface. Optionally, many data loggers can store data to a removable USB thumb drive to satisfy stand-alone applications. Even with a connected pressure sensor, the data logger channel capacity allows additional channels of information to be acquired and correlated with pressure information to satisfy nearly any level of measurement expansion.

 

Accessories

101087-1

DC/DC Converter for Sensors

$24.99
DC/DC Converter

Description

Allows you to power 5V rating sensor with a battery. Input voltage: DC8-35V, (12V/24V changes to 5V); Output parameter: DC5V 3A, 15W MAX

2000361-PIGTAIL10

Extra 10-foot wire harness with mating connector

$15.95
Go to product page
DC/DC Converter

Description

10-foot long wire harness (pigtail) with mating connector and seal for pressure transducers

2000361-PIGTAIL

Spare wire harness with mating connector

$9.95
DC/DC Converter

Description

Spare 3-foot long wire harness (pigtail) with mating connector and seal for pressure transducers

2000361-PIPEFITTING

Stainless Steel Reducer Hex Bushing

$9.95
DC/DC Converter

Description

To convert pressure transducer fitting from 1/8 NPT to 1/4 MNPT
Max operating pressure: 2000 PSI

Specifications

Measurement Range: 2000361-1600H: 0 to 1600 PSI
Material: 316 stainless steel and high temperature auto-graded plastic
Output: 0.5V – 4.5V linear voltage output
for 4-20mA output version, please check this out
Supply Voltage: 5V +/-5%, 0.02W
for 8-30V output version, please check this out
Long Term Working Temperature: -40 to +85ºC (-40 to +185ºF)
Accuracy: ±0.5%FS
Thread: 1/8” NPT-27
Protection Class: Typical IP65-66, depending on electric connection.
Overload Capacity: 2 times.
Pressure Medium: Any gas or liquid compatible with 316L stainless steel
Long-term stability: ± 0.5%FS/year
Temperature Effect on Zero: Typical: ±0.02%FS/ºC
Maximum: ±0.05%FS/ºC
Temperature Effect on Sensitivity: Typical: ±0.02%FS/ºC
Maximum: ±0.05%FS/ºC
Response Time: ≤1ms
Insulation Resistance: >100mΩ 500VDC
Explosion-proof Class: ExiaTTCT6
Electromagnetism Compatibility: EN61326-1-2013
EN61325-2-2:2013
EMC Directive 2014/30/EU
Wiring connector: Water sealed quick-disconnect. Mating connector and wire harness (3 ft pigtail) included.
Wiring: Red for +5V Supply Voltage
Black for GND
Yellow or Green for OUT
Warranty: 90 days

Logger inaccuracy not included in these specifications.

Compatible Products

Reviews